View HIH6131-021-001_7563092.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

honeywell humidicon ? digital humidity/temperature sensors hih6100 series ? 4.0 %rh accuracy datasheet
2 honeywell humidicon ? digital humidity/temperature sensors honeywell humidicon? digital humidity/temperature sensors hih series are digital outputtype relatie umidity rh and temperature sensors comined in te same pacage tese sensors proide an accuracy leel o 4.0 %rh ? industry-leading long-term stability ? true temperature-compensated digital i ? industry-leading total error band ? energy efficiency ? industry-leading reliability ? lowest total cost solution ? ultra-small package size and options ? other accuracies available: 1.7 %rh (hih9000 series), 2.0 %rh (hih8000 series), 3.0 %rh (hih7000 series), and 4.5 %rh (hih6000 series) what makes our sensors better? industr y-le ading tot al error band (teb) (5 %rh)* honeywell specifies total error bandthe most comprehensive, clear, and meaningful measurement that provides the sensors true accuracy of 5 %rh over a compensated range of 5 c to 50 c [41 f to 122 f] and 10 %rh to 90 %rh. teb includes all errors : ? humidity non-linearity ? humidity hysteresis ? humidity non-repeatability ? thermal effect on zero ? thermal effect on span ? thermal hysteresis t otal e rror band errors + + + + + humidity non-linearity humidity hysteresis humidity non-repeatability thermal effect on zero thermal effect on span thermal hysteresis total error band accuracy = = hih6120 hih6121 hih6130 hih6131 sensing.honeywell.com
3 total error band should not be confused with accuracy, which is actually a component of total error band. many competitors simply specify the accuracy of their device; however, the specification may exclude hysteresis and temperature effects, and may be calculated over a very narrow range, at only one point in the range, or at their absolute best accuracy level. it is then up to the customer to calibrate the device to make sure it has the accuracy needed for the life of the application. for more information about total error band, please see the related technical note, explanation of the total error band specification for honeywells digital humidity/temperature sensors. industr y-le ading long-term st ability (1.2 %rh over five years)* competitive humidity sensors need to go through a 12 hour at 75 %rh rehydration process (which requires special equipment chambers) to correct reflow temperature offset. honeywells sensor also experiences an offset after reflow; however, it only requires a five hour rehydration under ambient conditions (>50 %rh). honeywells industry-leading long term stability provides the following benefits to the customer. true, tempera ture-compensa ted digit al i 2 c or spi output* this typically allows the customer to remove the components associated with signal conditioning from the pcb to free up space and reduce costs associated with those components (e.g., acquisition, inventory, assembly). true, temperature-compensated digital i 2 c or spi output often eliminates problems that could occur from having multiple signal conditioning components across the pcb, as well as simplifies integration to the microprocessor, eliminating the need for customer-implemented, complex signal conditioning. honeywells industry-leading total error band provides the following benefits to the customer: ? eliminates individually testing and calibrating every sensor, which can increase their manufacturing time and process ? supports system accuracy and warranty requirements ? helps to optimize system uptime ? provides excellent sensor interchangeability the customer can remove one sensor from the tape, then remove the next sensor from the tape, and there is no part-to-part variation in accuracy honeywells industry-leading long-term stability provides the following benefits to the customer: ? minimizes system performance issues ? helps support system uptime by eliminating the need to service or replace the sensor during its application life ? eliminates the need to regularly recalibrate the sensor in their application, which can be inconvenient and costly sensing.honeywell.com
4 *competitive differentiator 4. 0 ac cura cy %rh features and benefts industr y-le ading reliability* hih6130/6131 and hih6120/6121 series sensors use a laser trimmed, thermoset polymer capacitive sensing element. the elements multilayer construction provides resistance to most application hazards such as condensation, dust, dirt, oils, and common environmental chemicals, which helps provide industry-leading stability and reliability lowest tot al cost solution* honeywells humidicon hih6100 series offers customers the lowest total cost solution due to the sensors industry-leading total error band and its being a combined humidity/temperature sensor combined humidity and tempera ture sensor the humidity and temperature sensors are co-located in the same package. this allows the rh measurement to be temperature compensated and provides a second, standalone temperature sensor output. this allows the user to purchase one sensor instead of two energy efficient* ? low supply voltage: can operate down to 2.3 vdc, which allows use in low energy and wireless-compatible applications to enhance energy savings and prolong system battery life ? low power consumption: the sensor goes into sleep mode when not taking a measurement within the application, consuming only 1 a of power versus 650 a in full operation in a battery operated system. sleep mode helps maximize battery life, reduces power supply size, and reduces the applications overall weight offers customers the lowest total cost solution. one sensor does the work of two! sensing.honeywell.com
5 high resolution high 14-bit humidity sensor resolution and 14-bit temperature sensor resolution within the application help the users system detect the smallest relative humidity or temperature change true, tempera ture-compensa ted digit al i2c or spi output* typically allows the customer to remove the components associated with signal conditioning from the pcb to free up space and reduce costs associated with those components (e.g., acquisition, inventory, assembly). often eliminates problems that could occur from having multiple signal conditioning components across the pcb. simplifies integration to the microprocessor, eliminating the need for customer-implemented, complex signal conditioning ult ra-small p ackage size soic-8 smd (surface mount device) and sip 4 pin packages are ultra small, including the condensation-resistant versions with hydrophobic filter on-board (hih6121 and hih6131). allows for flexibility of use within the application, occupies less space on the pcb, and typically simplifies placement on crowded pcbs or in small devices fi lter available with hydrophobic filter and condensation-resistance, allowing for use in many condensing environments , or without hydrophobic filter, non-condensing ta pe and reel cost-effective tape-and-reel packaging allows for use in high volume, automated pick-and-place manufacturing, eliminating lead misalignment to the pcb and helping the customer to reduce manufacturing costs wide opera ting tempera ture range -25 c to 85 c [-13 f to 185 f] allows for use in many applications optional one or two %rh level alarm outputs a feature of the hih6130 and hih6131, this provides the ability to monitor whether the rh level has exceeded or fallen below predetermined and critical levels within the application m ulti-function asic delivers flexibility within the application by lowering or eliminating the risk and cost of oem calibration rohs and weee complia nt, halogen free free up pcb space. reduce costs. choose options to best ft the application. features and benefts sensing.honeywell.com
6 hv ac/r may be used to provide precision rh and temperature measurement in air conditioning/air movement systems, enthalpy sensing, thermostats, humidifiers/ dehumidifiers, and humidistats to maintain occupant comfort and ideal storage humidity/temperature while achieving low energy consumption, supporting system accuracy and warranty requirements, maximizing system uptime, and improving overall system quality. respira tor y therapy may be used to provide precision rh and temperature measurement in sleep apnea machines and ventilators, enhancing patient comfort, safety and treatment effectiveness with warm and humidified air. incuba tors/microenvironments may be used to provide optimal temperature and rh levels to support critical processes and experiments, enhancing process efficiency with desired climate conditions. air compressors may be used to provide precision rh measurement in compressed air lines, allowing the system to remove any condensation; dry compressed air is critical for customer process control measurement. wea ther st a tions may be used to provide precision rh and temperature measurement in ground-based and airborne weather stations, allowing real time and highly accurate monitoring/ reporting of actual weather conditions. telecom cabinets may be used to provide precision rh and temperature measurement in the telecom cabinet hvac system; maintaining proper temperature and humidity levels in the cabinet provides maximum system uptime and performance. potential applications sensing.honeywell.com
7 honeywell humidicon ? digital humidity/temperature sensors t able 1. e nvironmental specifications characteristic condition min. t yp. max. unit operating temperature range C -25 [-13] C 85[185] c [f] storage temperature range C -40 [-40] C 85[185] c [f] storage humidity C 30 C 50 %rh soldering temperature: automated manual ipc/eia/jedec j-std-020d apply heat for 4 s max. for manual soldering C C C C 260 [500] 350 [662] c [f] esd mil-std 883h, method 3015.7 C C 4 kv latch-up immunity C C C 100 ma shock mil-std 202g, method 213d, test condition c, half-sine, 6 ms 3 perpendicular axis, 3 shock pulses per axis C C 100 g vibration mil-std 202g, method 204d, test condition d, 10 hz to 2000 hz C C 20 g light sensitivity exposed to 50 lumens yellow light; exhibited no change in output t able 2. humidity performance specifications characteristic condition min. t yp. max. unit supply voltage variation 2.3 vdc to 5.5 vdc C 0.1 0.5 %rh compensated humidity range 1 C 10 C 90 %rh compensated temp. range 1 C 5 [41] C 50 [122] c [f] resolution 14 bit adc resolution C C 0.04 %rh accuracy 2 C C C 4 %rh total error band 3 C C C 5 %rh response time airflow minimum 20 l/min C 6 8 s operating range non-condensing 0 C 100 %rh long term stability 50 %rh for 5 years C 0.05 1.2 %rh impact of soldering ipc/eia/jedec j-std-020d, peak temp. of 260 c [500 f] C C 2.5 %rh notes: 1 conversion formulas: 14 bit adc output for humidity to %rh: 14 bit adc output for temperature conversion to c: humidity (%rh) = humidity_14_bit_adc_output x 100 2 14 C 2 temperature (c) = temperature_14_bit_adc_output x 165 C 40 2 14 C 2 2 accuracy is specified at the typical supply voltage of 3.3 vdc and at 25 c [77 f]. it is the maximum deviation from the ideal transfer function of relative humidity measured over the humidity range of 10 %rh to 90 %rh and includes all errors due to humidity non-linearity, humidity hysteresis and humidity non-repeatability. 3 total error band is the maximum deviation from the ideal transfer function of relative humidity over the compensated range of 5 c [41 f] to 50 c [122 f]. it includes all errors due to humidity non-linearity, humidity hysteresis, humidity non-repeatability, thermal effect on zero, thermal effect on span and thermal hysteresis. sensing.honeywell.com
8 hih6100 series ? 4.0 %rh accuracy t able 3. t emperature performance specifications characteristic condition min. t yp. max. unit supply voltage variation dpd C 1.0 compensated temp. range C C resolution c stpp C C ddsd- 1 C C C response time 1/e slow moving air C s -phsntc psst C C s impact of soldering *1*n p C C note: 1 accuracy is specified over the compensated temperature range. t able 4. c urrent consumption characteristic v dd abbr. condition t yp. max. unit sleep current i -1 C 0.6 1 a dss i 2 c spi i dd i dd cttpt cttpt 1 1 ma ma t able 5. input and output characteristics characteristic abbr. condition min. t yp. max. unit supply voltage dd C d -ppph 0- i 0- nn C C dd high level output voltage 0) i 0) nn C C dd -pph *- C C C dd high level input voltage ih C C C dd 1 sttps i 2 c spi (for ss only) r p r ss C C C C 2.2 10 C C 0in 0in t able 6. m easurement timing characteristic abbr. condition min. t yp. max. unit start-up time (power-on to data ready) t sta c)cin stpp C 60 ms 6s dp ntsnt spiidp srttin sensing.honeywell.com
9 f igure 1. i 2 c timing diagram sd a scl t low t hdsta t hdsta t high t hddat t susta t susto t bus t sudat characteristic abbr. min. t yp. max. unit scl clock frequency f scl 100 C 400 khz start condition hold time relative to scl edge t hdsta 0.1 C C s minimum scl clock low width 1 t low 0.6 C C s minimum scl clock high width 1 t high 0.6 C C s start condition setup time relative to scl edge t susta 0.1 C C s data hold time on sda relative to scl edge t hddat 0 C 0.5 s data setup time on sda relative to scl edge t sudat 0.1 C C s stop condition setup time on scl t susto 0.1 C C s bus free time between stop and start condition t bus 1 C C s note: 1 combined low and high widths must equal or exceed minimum scl period. f igure 2. spi timing diagram t bus t clkd sclk miso ss t high t suss hiz hiz t hdss t low t clkd characteristic abbr. min. t yp. max. unit sclk clock frequency f scl 50 C 800 khz ss drop to first clock edge t hdss 2.5 C C s minimum sclk clock low width 1 t low 0.6 C C s minimum sclk clock high width 1 t high 0.6 C C s clock edge to data transition t clkd 0 C 0.5 s rise of ss relative to last clock edge t suss 0.1 C C s bus free time between rise and fall of ss t bus 2 C C s note: 1 combined low and high widths must equal or exceed minimum sclk period. honeywell humidicon ? digital humidity/temperature sensors sensing.honeywell.com
10 hih6100 series ? 4.0 %rh accuracy t able 7. hih6130/6131 and hih6120/6121 series maximal accuracy 1 (performance is specified between 10 %rh and 90 %rh) 90 80 70 60 50 2 3 3 3 3 3 3 3 3 2 2 3 3 3 3 3 3 3 3 2 40 2 3 3 3 3 3 3 3 3 2 2 3 3 3 3 3 3 3 3 2 30 20 10 0 10 20 30 40 50 1 .nddsdtincsthh)pt rela tive humidity (%rh) tempera ture (c) sensing.honeywell.com
11 honeywell humidicon ? digital humidity/temperature sensors f igure 3. soic-8 smd t ypical application c ircuits i 2 c spi digital humidity/temp. sensor v dd v core v ss nc scl sda al_l al_h v supply = 2.3 vdc to 5.5 vdc gn d gnd 12 v 0.1 f 0.22 f 2.2 kohm 83 4 5 6 1 2 7 led 2.2 kohm digital humidity/temp. sensor v dd v core v ss nc ss sclk miso al_l gn d 0.1 f 0.22 f 10 kohm 83 4 6 5 1 2 7 led v supply = 2.3 vdc to 5.5 vd c f igure 4. soic-8 smd mounting dimensions, pcb landing p attern and pinout [f or reference only: mm/[in].) mounting landing p attern 4,90 [0.1 93] 3,90 [0.1 53] 1,905 [0.075] 1,27 [0.050] 0.41 [0.01 6] 1 2 3 4 8 7 6 5 6,0 [0.236] 0,1 5 [0.006] 0,203 [0.0080] 2,055 [0.081] 8x 0,61 [0.024 ] 8x 2,03 [0.08] 4x 4,9 [0.193 ] 6x 1,27 [0.05] pinout for i 2 c v ersions pinout for spi v ersions pin asic pad description pin asic pad description v core connect via 0.1 f to ground v core connect via 0.1 f to ground v v 3 scl 3 4 4 sclk 5 al_h 5 miso al_l al_l 7 7 8 v supply voltage, connect via 0.22 f to ground 8 v supply voltage, connect via 0.22 f to ground do not connect pin(s) 5 and/or 6 if the built-in alarm feature is not desired. t ape and reel 4,00 [0.1 57] 1,50 [0.059] 1,75 [0.069] 0,29 [0.0 11 ] 13 [0.51] 330 [1 3,0] 17 ,4 [0.68] 10 2 [4.0] 8,00 [0.31 5] 1 2.00 [0.472] 5,50 [0.21 6] 2,58 [0.1 02] sensing.honeywell.com
12 hih6100 series ? 4.0 %rh accuracy f igure 5. sip 4 pin t ypical application c ircuit digital humidity/temp. sensor v dd v ss scl sda v supply = 2.3 vdc to 5.5 vdc gnd 0.22 f 2.2 kohm 13 4 2 2.2 kohm f igure 6. sip 4 pin mounting dimensions, pcb landing p attern and pinout [f or reference only: mm/[in].) mounting landing p attern 1 2 3 4 8,9 [0.35] 1,20 [0.047] pcb 1,2 - 2,0 [0.05 - 0.08] 4,90 [0.1 93] 3,90 [0.1 53] 5,0 [0.1 97] 1,27 [0.050] 0.41 [0.0 16 ] 0,063 [0.0025] 0,203 [0.0080] 1,905 [0.075] 1,27 [0.050] 1,05 dia. [0.040] 0,65 dia. [0.025] t ape and reel 1 4,00 [0.1 57] 1,50 [0.059] 1,75 [0.069] 0,32 [0.0 13 ] 13 [0.51] 330 [1 3,0] 21,4 [0.84] 10 2 [4.0] 8,00 [0.31 5] 1 6,00 [0.630] 5,00 [0.1 97] 2,61 [0.1 03] 1 ps psstppt pin asic pad description 1 dd dpdp hsp 2 ss supply ground - i 2 c clock sda i 2 c data sensing.honeywell.com
13 honeywell humidicon ? digital humidity/temperature sensors o rder guide catalog listing description hih6130-000-001 honeywell humidicon? digital humidity/temperature sensors: hih6130/6131 series, spi, 5 %rh total error band, soic-8 smd, no filter, non-condensing, 1000 units on tape and reel hih6130-000-001s honeywell humidicon? digital humidity/temperature sensors: hih6130/6131 series, spi, 5 %rh total error band, soic-8 smd, no filter, non-condensing, five units on tape (sample) hih6131-000-001 honeywell humidicon? digital humidity/temperature sensors: hih6130/6131 series, spi, 5 %rh total error band, soic-8 smd, hydrophobic filter, condensation-resistant, 1000 units on tape and reel hih6131-000-001s honeywell humidicon? digital humidity/temperature sensors: hih6130/6131 series, spi, 5 %rh total error band, soic-8 smd, hydrophobic filter, condensation-resistant, five units on tape (sample) hih6130-021-001 honeywell humidicon? digital humidity/temperature sensors: hih6130/6131 series, i 2 c, 5 %rh total error band, soic-8 smd, no filter, non-condensing, 1000 units on tape and reel hih6130-021-001s honeywell humidicon? digital humidity/temperature sensors: hih6130/6131 series, i 2 c, 5 %rh total error band, soic-8 smd, no filter, non-condensing, five units on tape (sample) HIH6131-021-001 honeywell humidicon? digital humidity/temperature sensors: hih6130/6131 series, i 2 c, 5 %rh total error band, soic-8 smd, hydrophobic filter, condensation-resistant, 1000 units on tape and reel HIH6131-021-001s honeywell humidicon? digital humidity/temperature sensors: hih6130/6131 series, i 2 c, 5 %rh total error band, soic-8 smd, hydrophobic filter, condensation-resistant, five units on tape (sample) hih6120-021-001 1 honeywell humidicon? digital humidity/temperature sensors: hih6120/6121 series, i 2 c, 5 %rh total error band, sip 4 pin, no filter, non-condensing, 100 units on tape hih6120-021-001s honeywell humidicon? digital humidity/temperature sensors: hih6120/6121 series, i 2 c, 5 %rh total error band, sip 4 pin, no filter, non-condensing, five units on tape (sample) hih6121-021-001 1 honeywell humidicon? digital humidity/temperature sensors: hih6120/6121 series, i 2 c, 5 %rh total error band, sip 4 pin, hydrophobic filter, condensation-resistant, 100 units on tape hih6121-021-001s honeywell humidicon? digital humidity/temperature sensors: hih6120/6121 series, i 2 c, 5 %rh total error band, sip 4 pin, hydrophobic filter, condensation-resistant, five units on tape (sample) 1 orders of 250 units or more are packaged on tape and reel. p roduct n omenclature sensing.honeywell.com
14 sensor rehydration notice: sensor rehydra tion ? exposure to elevated temperatures, such as those experienced during solder reflow, may dry out the sensing element. it is recommended that the sensor be allowed time to rehydrate after soldering or other high temperature/dry exposures. ? exposure to these conditions will not permanently damage the sensor. it will generally return to its factory-calibrated value after rehydration. ? if rehydration is not performed, the sensor may read a slight offset that slowly disappears over time as the sensor becomes exposed to ambient conditions. conversely, extended exposure to condensing and high humidity environments (>90 %rh) may cause a revisable shift in readings which will generally return to normal after the sensor has been allowed to dry off. to rehydrate the sensor, expose it to room temperature under ambient conditions (>50 %rh) for a minimum of five hours. additional informa tion the following associated literature is available on the web: ? product installation instructions ? product application note ? application sheets: C humidity sensor performance characteristics C humidity sensor theory and behavior C humidity sensor moisture and psychrometrics C humidity sensor chemical resistivity C thermoset polymer-based capacitive sensors ? technical notes: C i 2 c communication with the honeywell humidicon? digital humidity/temperature sensors C spi communication with the honeywell humidicon? digital humidity/temperature sensors C using alarms on the honeywell humidicon? digital humidity/temperature sensors C entering and using command mode on the honeywell humidicon? digital humidity/temperature sensors )*)stt4.0 %rh accuracy w arranty/remedy honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. honeywells standard product warranty applies unless agreed to otherwise by honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. if warranted goods are returned to honeywell during the period of coverage, honeywell will repair or replace, at its option, without charge those items it finds defective. t he foregoing is buyers sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particu - lar purpose. in no event shall honeywell be liable for conse- quential, special, or indirect damages. while we provide application assistance personally, through our literature and the honeywell website, it is up to the customer to determine the suitability of the product in the application. specifications may change without notice. the information we supply is believed to be accurate and reliable as of this printing. however, we assume no responsibility for its use. warning personal injury do not use these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. failure to comply with these instructions could result in death or serious injury. warning misuse of documentation ? the information presented in this product sheet is for reference only. do not use this document as a product installation guide. ? complete installation, operation, and maintenance information is provided in the instructions supplied with each product. failure to comply with these instructions could result in death or serious injury. sensing.honeywell.com
009059-6-en august 2013 copyright ? 2013 honeywell international inc. all rights reserved. sensing and control honeywell 1985 douglas drive north golden valley, mn 55422 honeywell.com find out more honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. for application assistance, current specifications, pricing or name of the nearest authorized distributor, contact your local sales office. to learn more about honeywells sensing and control products, call +1-815-235-6847 or 1-800-537-6945 , visit sensing.honeywell.com, or e- mail inquiries to info.sc@honeywell.com

▲Up To Search▲

Price & Availability of HIH6131-021-001

	To Download HIH6131-021-001 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .